8-bit ultralow power MCU
Description
STM8L051F3
Value line, 8-bit ultralow power MCU, 8-KB Flash, 256-byte data EEPROM, RTC, timers, USART, I2C, SPI, ADC
Data brief preliminary data
Features
■ Operating conditions – Operating power supply: 1.
8 V to 3.
6 V Temperature range: 40 °C to 85 °C
■ Low power features – 5 low power modes: Wait, Low power run, Low power wait, Active-halt with RTC, Halt – Ultralow leakage per I/0: 50 nA – Fast wakeup from Halt: 5 µs
■ Advanced STM8 core – Harvard architecture and 3-stage pipeline – Max freq: 16 MHz, 16 CISC MIPS peak – Up to 40 external interrupt sources
■ Reset and supply management – Low power, ultrasafe BOR reset with 5 selectable thresholds – Ultra low power POR/PDR – Programmable voltage detector (PVD)
■ Clock management – 32 kHz and 1 to 16 MHz crystal oscillators – Internal 16 MHz factory-trimmed RC – Internal 38 kHz low consumption RC – Clock security system
■ Low power RTC – BCD calendar with alarm interrupt – Digital calibration with +/- 0.
5 ppm accuracy – LSE security system – Auto-wakeup from Halt w/ periodic interrupt
■ Memories – 8 Kbytes of Flash program memory and 256 bytes of data EEPROM with ECC – Flexible write and read protection modes – 1 Kbyte of RAM
TSSOP20
■ DMA – 4 channels supporting ADC, SPI, I2C, USART, timers – 1 channel for memory-to-memory
■ 12-bit ADC up to 1 Msps/28 channels – Internal reference voltage
■ Timers – Two 16-bit timers with 2 channels (used as IC, OC, PWM), quadrature encoder – One 8-bit timer with 7-bit prescaler – 2 watchdogs: 1 Window, 1 Independent – Beeper timer with 1, 2 or 4 kHz frequencies
■ Communication interfaces – Synchronous serial interface (SPI) – Fast I2C 400 kHz SMBus and PMBus – USART
■ Up to 18 I/Os, all mappable on interrupt vectors
■ Development support – Fast on-chip programming and nonintrusive debugging with SWIM – Bootloader using USART
Table 1.
Device summary
Reference
Part number
STM8L051xx
STM8L051F3
April 2012
Doc ID 022985 Rev 1
This is preliminary information on a new produ...
Similar Datasheet
