TVS Diodes
Description
P6KE Series
TVS Diodes
Axial Leaded – 600W > P6KE series
RoHS
Pb e3
Bi-directional
Uni-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.
2) by 10/1000us
Test Waveform(Fig.
4)(Note 1)
PPPM
-Single Die Parts
Peak Pulse Power Dissipation(Fig.
2) by
10/1000us Test Waveform(Fig.
4)(Note 1)
PPPM
-Stacked Die Parts(Note 4)
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
PD
Peak Forward Surge Current, 8.
3ms Single Half Sine Wave Unidirectional Only (Note 2)
IFSM
600
W
800
W
5.
0
W
100
A
Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 3)
VF
3.
5/5.
0 V
Operating Junction and Storage Temperature Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
Typical Thermal Resistance Junction to Ambient RƟJA
20 °C/W 75 °C/W
Notes: 1.
Non-repetitive current pulse , per Fig.
4 and derated above TJ (initial) = 25OC per Fig.
3.
2.
Measured on 8.
3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
3.
VF < 3.
5V for single die parts and VF< 5.
0V for stacked-die parts.
4.
For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics.
Description
The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
• 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.
01%
• Glass passivated chip junction in DO-15 Package
• Fast response time: typically less than 1.
0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over-specified voltage or current
• Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A
• IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
• EFT protection of data line...
Similar Datasheet