ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
MF 5mmL, Low Impedance series
Low impedance over wide temperature range of – 55 to +105°C, with 5mm height.
Suited for DC-DC converters where smaller case size and lower impedance are required.
Compliant to the RoHS directive (2002/95/EC).
MF
Low Impedance
MT
Specifications
Item
Performance Characteristics
Category Temperature Range
– 55 to +105°C
Rated Voltage Range
6.
3 to 35V
Rated Capacitance Range 1 to 100µF
Rated Capacitance Tolerance ± 20% at 120Hz, 20°C
Leakage Current Tangent of loss angle (tan δ)
After 2 minutes' application of rated voltage, leakage current is not more than 0.
01CV or 3 (µA), whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.
)
6.
3 0.
22
10 0.
20
16 0.
18
25 0.
14
35 0.
12
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.
)
Z– 25°C / Z+20°C Z– 55°C / Z+20°C
6.
3 2 4
Measurement frequency : 120Hz
10 16 25 35 2222 4333
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storig the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.
E.
T.
)
φd
Type numbering system (Example : 25V 10µF)
1 2 3 4 5 6 7 8 9 10 11
UMF 1 E 1 0 0 M DD
φ D+0.
5 MAX P ± 0.
5
L+1MAX
15 MIN
4 MIN
(mm) φ D 4 5 6.
3 P 1.
5 2.
0 2.
5 φ d 0.
45 0.
45 0.
45
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
4 to 6.
3
DD
Configuration Capacitance tolerance (± 20%)
Rated capacitance (10µF) Rate...
Similar Datasheet
