ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
LS Snap-in Terminal Type, 85°C Standard series
Withstanding 3000 hours application of rated ripple current at 85°C.
Compliant to the RoHS directive (2002/95/EC).
LS
Smaller
LG
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +85°C (16 to 250V), – 25 to +85°C (350 to 450V)
16 to 450V
56 to 56000µF
± 20% at 120Hz, 20°C
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency :120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.
)
16 0.
50
25 0.
40
35 0.
35
50 0.
30
63 0.
25
80 0.
20
100 0.
20
160 0.
15
180 0.
15
200 0.
15
250 0.
15
350 0.
15
400 0.
15
450 0.
20
Rated voltage (V)
Impedance ratio Z – 25°C/ Z+20°C ZT/Z20(MAX.
) Z – 40°C/ Z+20°C
16 to 100 4 20
Measurement frequency : 120Hz
160 to 250
350 to 450
38 12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.
C.
bias plus rated ripple current is applied for 3000 hours at 85°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall meet the requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
φ D+1MAX.
4.
0±0.
5 2.
5
Drawing
Polarity bar Sleeve (P.
E.
T.
)
L±2 Pressure relief vent
10 ±0.
1
10
4.
0±0.
5
0.
8
+...
Similar Datasheet