ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
PJ Low Impedance, For Switching Power Supplies series
Low impedance and high reliability withstanding 5000 hours load life
at +105˚C (3000 / 2000 hours for smaller case sizes as specified below).
Capacitance ranges available based on the numerical values in E12 series under JIS.
Ideally suited for use of switching power supplies.
Compliant to the RoHS directive (2011/65/EU).
PJ
Smaller
Specifications
PS
Item
Performance Characteristics
Category Temperature Range – 55 to +105˚C (6.
3 to 100V), – 40 to +105˚C (160 to 400V), – 25 to +105˚C (450V)
Rated Voltage Range
6.
3 to 450V
Rated Capacitance Range 0.
47 to 15000µF
Capacitance Tolerance
± 20% at 120Hz, 20˚C
Rated Voltage (V)
6.
3 to 100
160 to 450
Leakage Current
Leakage current
After 1 minute's application of rated voltage, leakage current is not more CV =< 1000 : I = 0.
1CV+40 (µA) max.
(1 minute's)
than 0.
03CV or 4 (µA), whichever is greater.
CV > 1000 : I = 0.
04CV+100 (µA) max.
(1 minute's)
120Hz, 20˚C
Tangent of loss angle (tan δ) Rated Voltage (V) tan δ (MAX.
)
6.
3 0.
22
10 0.
19
16 0.
16
25 0.
14
35 0.
12
50 0.
10
63 to 100 160 to 350 400 • 450
0.
08
0.
20
0.
25
For capacitance of more than 1000µF, add 0.
02 for every increase of 1000µF.
Rated voltage (V)
6.
3 • 10 16 25 • 35 50 to 100 160 • 200 250 315 • 350 400
Stability at Low Temperature Impedance
Z– 25˚C / Z+20˚C
—
—
—
—
—
—
—
—
ratio (MAX.
)
Z– 40˚C / Z+20˚C
—
—
—
—
4
6
8 10
Z– 55˚C / Z+20˚C
4
3
3
2 ————
450 120Hz 15 — —
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.
C.
bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.
3, 3000 hours for φD=8) at 105˚C, the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall m...
Similar Datasheet
