ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GJ Snap-in Terminal Type, 105°C Low-Profile Sized
(15)
(15mmL) series
Withstanding 2000 hours application of rated ripple current at 105°C.
Smaller than low-profile GJ series.
Ideally suited for flat design of switching power supply.
Compliant to the RoHS directive (2002/95/EC).
GJ
Low Profile
G J (15)
Specifications
Item Performance Characteristics
Category Temperature Range
– 40 to +105°C (160 to 250V) , – 25 to +105°C (315 to 400V)
Rated Voltage Range
160 to 400V
Rated Capacitance Range 39 to 390µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current Tangent of loss angle (tan δ)
Stability at Low Temperature
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
0.
20 MAX.
120Hz 20°C
Rated voltage(V)
Impedance ratio ZT/Z20(MAX.
)
Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C
Measurement frequency : 120Hz
160 to 250
315 • 400
38
12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.
C.
bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall meet the requirements listed at right.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Marking
Printed with white color letter on black sleeve.
φ D +1MAX.
4.
0±0.
5 2.
5
Drawing
Polarity bar Sleeve (P.
E.
T.
)
15±2
4.
0±0.
5 Pressure relief vent
10
10 ±0.
1
0.
8
+0.
2 -0.
1
0.
8 +-00.
.
21
2-2 φ ± 0.
1
(PC board hole dimensions)
...
Similar Datasheet
