ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
VP Bi-Polarized series
Standard bi-polarized series for entertainment electronics.
Compliant to the RoHS directive (2002/95/EC).
EP
Wide Te m p e r a t u re
VP
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated Voltage Range
6.
3 to 100V
Rated Capacitance Range 0.
47 to 6800µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 5 minutes' application of rated voltage, leakage current is not more than 0.
03CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ)
For capacitance of more than 1000µF, add 0.
02 for every increase of 1000µF.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) 6.
3 10 16 25 35 50 63 100
tan δ (MAX.
)
0.
26
0.
24
0.
22
0.
20
0.
16
0.
14
0.
12
0.
10
Measurement frequency : 120Hz
Rated voltage (V)
6.
3 10 16 25 35 50 63 100
Stability at Low Temperature Impedance ratio
Z– 25°C / Z+20°C
4
3
2
2
2
2
2
2
ZT / Z20 (MAX.
) Z– 40°C / Z+20°C
10
8
6
5
4
4
3
3
Endurance
Shelf Life Marking
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
φD+0.
5 MAX P±0.
5
Radial Lead Type
Sleeve (P.
E.
T.
)
φd
Pressure relief vent
(φ6.
3up)
L+ MAX
15MIN
4MIN
(L < 20) 1.
5 (L >= 20) 2.
0
(mm) φD 5 6.
3 8 10 12.
5 16 18 P 2.
0 2.
5 3.
5 5.
0 5.
0 7.
5 7.
5 φd 0.
5 0.
5 0.
6 0.
6 0.
6 0.
8 0.
8
• Please refer to page 20 about the end seal con...
Similar Datasheet
