ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
PS Miniature Sized, Low Impedance, For Switching Power Supplies series
Wide temperature range type, miniature sized.
Compliant to the RoHS directive (2002/95/EC).
PJ
Smaller
(Through 100V only)
PS
Long Life TS
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Performance Characteristics – 55 to +105˚C (6.
3 to 100V), – 40 to +105˚C (160 to 400V), – 25 to +105˚C (450V) 6.
3 to 450V 0.
47 to 15000µF ± 20% at 120Hz, 20˚C
Leakage Current
Rated voltage (V) Leakage current
6.
3 to 100
After 1 minute's application of rated voltage, leakage current is not more than 0.
03CV or 4 (µA) , whichever is greater.
160 to 450 CV <= 1000 : I= 0.
1CV+40 (µA)max.
(1 minute's) CV > 1000 : I= 0.
04CV+100 (µA)max.
(1 minute's)
Tangent of loss angle (tan δ)
For capacitance of more than 1000µF, add 0.
02 for every increase of 1000µF
Measurement frequency : 120Hz, Temperature : 20˚C
Rated voltage (V) 6.
3 10 16 25 35 50 63 100 160 to 250 315 · 350 400 · 450
tan δ (MAX.
) 0.
24
0.
20
0.
16
0.
14
0.
12
0.
10
0.
09
0.
08
0.
15
0.
20
0.
25
Stability at Low Temperature
Rated voltage (V)
Impedance ratio (MAX.
)
Z– 25˚C / Z+20˚C Z– 40˚C / Z+20˚C Z– 55˚C / Z+20˚C
6.
3 · 10 — — 5
16 · 25 — — 4
35 · 50 — — 3
63 · 100 160 · 200
23 34 ——
Measurement frequency : 120Hz
250 315 · 350 400
450
3 4 6 15
6 8 10 —
————
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.
C.
bias plus rated ripple
current is applied for 3000 hours (2000 hours for φD= 5 to 10) at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change Within ±20% of the initial capacitance value
tan δ
200% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5...
Similar Datasheet
