ALUMINUM ELECTROLYTIC CAPACITORS
Description
ALUMINUM ELECTROLYTIC CAPACITORS
PM Extremely Low Impedance, High Reliability series
High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours for smaller case sizes as specified below).
Capacitance ranges available based on the numerical values in E12 series under JIS.
Compliant to the RoHS directive (2002/95/EC).
(through 100V only)
PM
Smaller
Specifications
PW
Item
Performance Characteristics
Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Leakage Current
– 55 to +105°C (6.
3 to 100V), –40 to +105°C (160 to 400V), –25 to +105°C (450V)
6.
3 to 450V
0.
47 to 15000µF
± 20% at 120Hz, 20°C
Rated Voltage (V) Leakage current
6.
3 to 100
160 to 450
After 1 minute's application of rated voltage, leakage current is not more CV <= 1000 : I = 0.
1CV+40 (µA) max.
(1 minute's)
than 0.
03CV or 4 (µA), whichever is greater.
CV > 1000 : I = 0.
04CV+100 (µA) max.
(1 minute's)
For capacitance of more than 1000µF, add 0.
02 for every increase of 1000µF.
Measurement frequency : 120Hz, Temperature : 20°C
Tangent of loss angle (tan δ) Rated Voltage (V) tan δ (MAX.
)
6.
3 0.
22
10 0.
19
16 0.
16
25 0.
14
35 0.
12
50 0.
10
63 to 100 160 to 350 400 · 450
0.
08
0.
20
0.
25
Rated voltage (V)
6.
3 · 10 16 25 · 35 50 to 100 160 · 200 250 315 · 350 400
Stability at Low Temperature Impedance
Z– 25°C / Z+20°C
—
—
—
—
—
—
—
—
ratio (MAX.
)
Z– 40°C / Z+20°C
—
—
—
—
4
6
8 10
Z– 55°C / Z+20°C
4
3
3
2 ————
450 120Hz 15 — —
Endurance
Shelf Life Marking
Radial Lead Type
Sleeve (P.
E.
T.
)
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.
C.
bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.
3, 3000 hours for φD=8) at 105°C, the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they sha...
Similar Datasheet