LED Optimized Drivers
Description
75W
LP75W Series
DIMMING
LED Optimized Drivers
75 Watt - LP75W Series
CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH DIMMING
Model: LP75W Series
Environmental
● Drive Mode: Constant Current or Constant Voltage ● Technology: PFC Corrected 2-Stage Switch Mode ● Output Power: 75W Max.
● Input Voltage: 90 to 305VAC, 47- 63Hz ● Number of Outputs: One ● Output Voltages: 4VDC - 214VDC ● Output Currents: 350mA - 6250mA ● Optional 0-10V or PWM Positive Dimming 10% ~ 100%
Safety and Compliance
1.
Operating temperature: Tc 90C Maximum.
Reference -30 to +65°C ambient 2.
Storage temperature range: -40 to +85°C 3.
Humidity (non-condensing): 5% - 95%RH 4.
Cooling: Convection 5.
Vibration Frequency: 5-55Hz/2g, 30 minutes 6.
Impact resistance: 1g/s 7.
MTBF@ 40OC: 474,000 hours @ Full Load per MIL-217F Notice 2.
Electrical Specifications at 25OC
1.
UL8750, EN61347, CSA 22.
2 safety compliant 2.
FCC, 47CFR Part 15 Class B compliant 3.
Water resistant and Dust Proof Design: IP66,
NEMA6, for Dry, Damp, Wet Locations.
4.
Compact Miniature, Lightweight Design.
5.
Safety Isolation between Primary and Secondary 6.
Meets EN61000-3-2 & EN61000-3-3 Class C 7.
Protection: output over-voltage, output over-current,
output short circuit, auto-recovery.
8.
EN614000-4-5: 2kV/4kV 8/20 µsec transient protection.
● Input voltage range: 90 to 305VAC ● Frequency: 47- 63HZ ● Power Factor: > 0.
90 at > 75% Load, 120Vac/230Vac/277Vac 50/60Hz ● THD%: < 20% at > 60% Load, 120Vac/230Vac/277Vac 50/60Hz ● Inrush current: <50A at 25C, 277V, cold start, Max.
Load ● Input current: 1.
0A Maximum ● Efficiency: 86% typical at 230Vac Full Load ● Constant Current regulation: +/-2% Over Input Line Variation ● Load regulation accuracy: +/-3% ● Leakage current: 400uA typical; Hold up time: half cycle
Constant Current Versions
E325626
IP66
Part Number (2)
LP75W-214-C0350 LP75W-166-C0450 LP75W-108-C0700 LP75W-72-C1050 LP75W-54-C1400 LP75W-48-C1560 LP75W-42-C1790 LP75W-36-C2100 LP75W-27-C2800 LP75W-24-C3130 LP7...
Similar Datasheet
