0.6A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Description
Elektronische Bauelemente
SL1116
0.
6A Low Dropout Positive Adjustable or Fixed-Mode Regulator
RoHS Compliant Product
Description
The SL1116 is a low dropout at positive adjustable or fixed-mode regulator with min.
of 0.
6A output current capability.
The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.
3V logic supply.
SL1116 is also well suited for other applications such as VGA cards.
SL1116 is guaranteed to have lower than 1.
3V dropout at full load current making it ideal to provide well regulated outputs of 1.
25V to 5V with up to 12V input supply.
Features
* 1.
3V Max.
Dropout Full Load Current * 3-Terminal Adjustable or Fixed 1.
5V,1.
8V,2.
5V,3.
3V,5.
0V * Output Current Limiting * Good Noise Rejection * Fast Transient Response * Built-in Thermal Shutdown
Applications
* PC Peripheral * Communication
SOT-223
REF.
A C D E I H
Millimeter Min.
Max.
6.
70 7.
30
2.
90 3.
10 0.
02 0.
10
0 10
0.
60 0.
80 0.
25 0.
35
REF.
B J 1 2 3 4 5
Millimeter Min.
Max.
13 TYP.
2.
30 REF.
6.
30 6.
70 6.
30 6.
70 3.
30 3.
70 3.
30 3.
70 1.
40 1.
80
Typical Circuit
3.
3V /0.
6A
2.
5V/0.
6A
http://www.
SeCoSGmbH.
com/
01-Jun-2002 Rev.
A
Any changing of specification will not be informed individual
Page 1 of 4
Elektronische Bauelemente
Block Diagram
SL1116
0.
6A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Pin Descriptions
Name
I/O
Adj (GND) I
Pin#
1
Vout
O2
Vin I 3
Function
A resistor divider from this pin to the Vout pin and ground sets the output voltage (Ground only for fixed mode)
The output of the regulator.
A minimum of 10 F capacitor (0.
15 ESR 20 ) must be connected from this pin to ground to insure stability.
The input pin of regulator .
Typically a large storage capacitor(0.
15 ESR 20 ) is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response .
This pin must always be 1.
3V higher than Vou...
Similar Datasheet