Surface Mount Termination
Description
Model C150N50Z4
Surface Mount Termination 150 Watts, 50Ω
Description
The C150N50Z4 is high performance Aluminum Nitride (AlN) surface mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO).
The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS.
The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits.
The termination is also RoHS compliant!
Features:
• RoHS Compliant • 150 Watts • DC – 4.
0 GHz • AlN Ceramic • Non-Nichrome Resistive Element • Low VSWR
• 100% Tested • Small Size
General Specifications
Resistive Element Substrate Terminal Finish Operating Temperature Thick film AlN Ceramic Matte Tin over Nickel Barrier -50 to +200°C (see de rating chart)
Tolerance is ±0.
010”, unless otherwise specified.
Designed to meet of exceed applicable portions of MIL-E-5400.
All dimensions in inches.
Electrical Specifications
Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, ± 2% 150 Watts DC – 4.
0 GHz >24 dB DC - 2.
7 GHz >20 dB DC - 4.
0 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance.
Specifications subject to change.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Model C150N50Z4
Typical Performance: C150N50Z4 C150N50Z4
Power De-rating:
Tape & Reel:
*Actual performance could be limited by the solder properties of the application
Mounting Footprint and Procedure:
2 of 2
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Available on Tape and Reel For Pick and Place Manufacturing.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anaren:
C150N50Z4
...
Similar Datasheet
