1.5A PWM Buck DC/DC Converter
Description
AX3020
200KHz, 1.
5A PWM Buck DC/DC Converter
GENERAL DESCRIPTION The AX3020 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 1.
5A load without additional transistor.
It saves board space.
The external shutdown function can be controlled by logic level and then come into standby mode.
The internal compensation makes feedback control having good line and load regulation without external design.
Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch.
If current limit function occurs and VFB is down below 0.
5V, the switching frequency will be reduced.
The AX3020 series operates at a switching frequency of 200KHz thus allow smaller sized filter components than what would be needed with lower frequency switching regulators.
Other features include a guaranteed +3% tolerances on output voltage under specified input voltage and output load conditions, the chips are available in a standard 8-lead SOP package.
•yÑb€ R ` w FEATURES VÛm om c .
ch version.
e t Output voltage: adjustable output o of voltage range: 0.
75V to 22V+3%.
g .
Adjustable version output ww w 200KHz fixed switching frequency.
Voltage mode non-synchronous PWM control.
Thermal-shutdown and current-limit protection.
ON/OFF shutdown control input.
Short Circuit Protect (SCP).
Operating voltage can be up to 24V.
Output load current: 1.
5A.
SOP-8L Pb-Free packages.
Low power standby mode.
Built-in switching transistor on chip.
-
1/8
Axelite Confidential Materials, do not copy or distribute without written consent.
Rev.
1.
3 Aug.
04, 2010
AX3020
BLOCK DIAGRAM
EN
200mV
V CC
220mV CURRENT SOURCE BIAS 0.
75V REFERENCE 2.
5V REGULATOR START UP
COMP.
+ _
Current limit
COMP.
FB
+ AMP _ COMP.
+
COMP.
CONTROL + DRIVER
Thermal Shutdown
PIN ASSIGNMENT The package of AX3020 is SOP-8L; the pin assignment is given by:
( Top View ) VCC SW 1
A...
Similar Datasheet
