RDS Demodulation
Description
Ordering number : EN6037
CMOS IC
LC72723, LC72723M
RDS Demodulation IC
Overview
The LC72723 is an RDS (Radio Data System) signal demodulation IC.
This IC integrates a bandpass filter, the demodulation circuit, and buffer RAM on a single chip and can read out RDS data in slave mode operation with the provision of an external clock input.
It also supports master mode, in which the data is read out in synchronization with an RDS clock output provided by the IC itself.
Package Dimensions
unit: mm 3006B-DIP16
[LC72723]
16 9 7.
62
6.
4
1 19.
2
8
Functions
• Bandpass filter: Switched capacitor filter (SCF) • RDS demodulation: Functions include 57kHz carrier regeneration, clock regeneration, biphase decoding, and differential decoding • Buffer RAM: Stores 128 bits (about 100 ms) of data.
• Data output: Output can be switched between master mode and slave mode readout.
• RDS ID detection: Supports ID reset • Standby control: Stops the crystal oscillator.
• Fully adjustment free.
0.
71
2.
54
0.
48
1.
2
3.
4
3.
65max
3.
0
SANYO: DIP16
unit: mm 3035A-MFP16
[LC72723M]
16 9 0.
625
Ratings
• Operating supply voltage: 4.
5 to 5.
5 V • Operating temperature: –40 to 85°C • Packages: DIP16 and MFP16
1 10.
1 1.
5 8 5.
15 6.
4 4.
4
1.
8max
0.
15
0.
35
1.
27
0.
605
0.
1
SANYO: MFP16
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage.
Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifi...
Similar Datasheet