Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26 Series Resistors in Outputs
Description
74VCX162374 Low Voltage 16-Bit D-Type Flip-Flop
January 2000 Revised January 2000
74VCX162374 Low Voltage 16-Bit D-Type Flip-Flop with 3.
6V Tolerant Inputs and Outputs and 26Ω Series Resistors in Outputs
General Description
The VCX162374 contains sixteen non-inverting D-type flipflops with 3-STATE outputs and is intended for bus oriented applications.
The device is byte controlled.
A buffered clock (CP) and output enable (OE) are common to each byte and can be shorted together for full 16-bit operation.
The VCX162374 is also designed with 26Ω series resistors in the outputs.
This design reduces line noise in applications such as memory address drivers, clock drivers and bus transceivers/transmitters.
The 74VCX162374 is designed for low voltage (1.
65V to 3.
6V) VCC applications with I/O compatibility up to 3.
6V.
The 74VCX162374 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation.
Features
s 1.
65V–3.
6V VCC supply operation s 3.
6V tolerant inputs and outputs s 26Ω series resistors in outputs s tPD (CLK to O n) 3.
4 ns max for 3.
0V to 3.
6V VCC 4.
8 ns max for 2.
3V to 2.
7V VCC 9.
6 ns max for 1.
65V to 1.
95V VCC s Power-off high impedance inputs and outputs s Supports live insertion and withdrawal (Note 1) s Static Drive (IOH/IOL) ±12 mA @ 3.
0V VCC ±8 mA @ 2.
3V VCC ±3 mA @ 1.
65V VCC s Uses patented noise/EMI reduction circuitry s Latch-up performance exceeds 300 mA s ESD performance: Human body model > 2000V Machine model > 200V
Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Ordering Code:
Order Number 74VCX162374MTD Package Number MTD48 Package Descriptions 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.
1mm Wide
Devices also available in Tape and Reel.
Specify by appending suffix letter “X” to the orderin...
Similar Datasheet
