9A Load Switch
Description
SLG59M1600V
7.
8 mΩ, 9 A Load Switch
with Discharge and Reverse Current Blocking
General Description
The SLG59M1600V is designed for load switching application.
The part comes with one 9 A rated MOSFET switched on by an ON control pin.
MOSFET turn on time is independently adjusted by an external capacitor.
Features
• One 9 A independent MOSFET with reverse current blocking
• Integrated VGS Charge Pump • Internal discharge for gate and source • Ramp Control • Protected by thermal shutdown • Pb-Free / RoHS Compliant • Halogen-Free • STDFN 14L, 1 x 3 x 0.
55 mm
Pin Configuration
MOS_D MOS_D ON_MOS
VDD ON_MOS
MOS_D MOS_D
1 14 2 13 3 12 4 11 5 10 69 78
MOS_S MOS_S CAP_MOS GND CAP_MOS
MOS_S MOS_S
14-pin STDFN (Top View)
Block Diagram
MOS_D
+2.
5 to 5.
5 V CAP_MOS
Charge Pump
PIN10
PIN12
9 A @ 7.
8 mΩ Reverse Blocking
Linear Ramp Control
Over Temperature Protection
ON_MOS
PIN3 PIN5
CMOS Input
©2022 Renesas Electronics Corporation 000-0059M1600-104
MOS_S
Rev 1.
04 Revised February 10, 2022
Pin Description
Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Pin Name MOS_D MOS_D ON_MOS
VDD ON_MOS MOS_D MOS_D MOS_S MOS_S CAP_MOS
GND CAP_MOS
MOS_S MOS_S
Ordering Information
Part Number SLG59M1600V SLG59M1600VTR
SLG59M1600V
Type MOSFET MOSFET
Input VDD Input MOSFET MOSFET MOSFET MOSFET Input GND Input MOSFET MOSFET
Pin Description Drain of MOSFET Drain of MOSFET Turns on MOS (4 MΩ pull down resistor).
Tied to Pin 5 on PCB.
+5VDD Power Turns on MOS (4 MΩ pull down resistor).
Tied to Pin 3 on PCB.
Drain of MOSFET Drain of MOSFET Source of MOSFET Source of MOSFET Sets ramp and turn on time for MOSFET.
Tied to Pin 12 on PCB.
Ground Sets ramp and turn on time for MOSFET.
Tied to Pin 10 on PCB.
Source of MOSFET Source of MOSFET
Type STDFN 14L STDFN 14L (Tape and Reel)
Production Flow Industrial, -40 °C to 85 °C Industrial, -40 °C to 85 °C
000-0059M1600-104
Page 2 of 11
SLG59M1600V
Absolute Maximum Ratings
Parameter Description
Conditions
Min.
Typ.
Max...
Similar Datasheet
