600Watt TVS
Description
SMBJ5.
0 THRU SMBJ440CA
E480232
Features
• For Surface Mount Applicationsin Order to Optimize Board Space • Low Inductance • Fast Response Time: Typical Less than 1ps From 0V to VBR min • Halogen Free.
“Green” Device (Note 1) • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating
• Lead Free Finish/RoHS Compliant (Note 2) ("P" Suffix Designates RoHS Compliant.
See Ordering Information)
• For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.
e.
SMBJ5.
0CA for 5% Tolerance
Mechanical Data
• Polarity: Color Band Denotes Positive end( cathode) Except Bi-directional Types
• Maximum Soldering Temperature:260°C for 10 Seconds • Terminals: Solderable Per MIL-STD-750, Method 2026
Maximum Ratings
• Operating Junction Temperature Range: -55°C to +175°C • Storage Temperature Range: -55°C to +175°C • Thermal Resistance :20°C/W Junction to Lead • Thermal Resistance :25°C/W Junction to Case • Thermal Resistance :100°C/W Junction to Ambient
Electrical Characteristics @ 25°C Unless Otherwise Specified
Peak Pulse Power
Surge Current on
IPP
10/1000μs Waveform
See the Table
Note 3
Peak Pulse Power Dissipation
PPP
600W Note 3,4,5
Steady State Power Dissipation
PM(AV)
5.
0W Note 6
Peak Forward Surge Current
8.
3 ms Single Half
IFSM
100A Sine-Wave
Unidirectional Only
NOTES: 1.
Halogen free "Green"products are defined as those which contain <900ppm bromine, <900ppm
chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
2.
High Temperature Solder Exemption Applied, see EU Directive Annex 7a.
3.
Non-repetitive current pulse, per Fig.
3 and derated above TA=25 °C per Fig.
4 4.
Mounted on 5.
0mm2 copper pads to each terminal.
5.
Peak pulse current waveform is 10/1000us, with maximum duty Cycle of 0.
01%.
6.
Power dissipation, on infinite heat sink at TL=75oC
Pin Configuration:
Cathode
Uni-directional
Anode
Bi-directional
600 Watt TVS 5.
0 to 440 Volts
SMB (DO-214AA) (LEAD FRAME)
H
J
Cathode Mark
D
A
C
E
F
B
G
DIMENSIO...
Similar Datasheet
