Quad 10-Ohm +/-12V outside-the-rails Analog Switch
Description
November 2017
HI-8200, HI-8201, HI-8202
Quad 10 Ohm +/-12V outside-the-rails
Analog Switch with
Open Circuit when Power Off
GENERAL DESCRIPTION
The HI-8200 is a quad analog CMOS switch fabricated with Silicon-on-Insulator (SOI) technology for latch-up free operation and maximum switch isolation.
High voltage gate drive is entirely created on-chip enabling +/-12V switching range from a single 3.
3V or 5V supply.
These switches are ideally suited for applications demanding low switch leakage when the power pins are 0V.
At 25°C and with VDD from 3.
0V to 5.
5V, the switch resistance (RON) is typically 8W.
RON is independent of VDD.
In a switching range of -5V to +5V, the maximum deviation of RON from flat is less than 5%.
These switches conduct equally well in either direction.
Power down and Off state leakages are less than 10nA maximum.
Charge injection is less than 10pC.
Switching times are typically 180ns to the On state and 60ns to the Off state.
The onboard charge pump allows an On/Off cycle time of 5KHz for all four switches simultaneously before the switching range becomes restricted.
The HI-8200 provides four each normally open switches when the switch control inputs are low.
The HI-8201 provides four each normally closed switches when the switch control inputs are low.
The HI-8202 provides a combination of two normally closed and two normally open switches.
Industry-standard plastic package options include 20-pin TSSOP, 16-pin DIP and 16-pin QFN.
Ceramic packaging is available on request.
All three products are offered in both industrial (-40°C to +85°C) and extended (-55°C to +125°C) temperature range options.
FEATURES
·CMOS analog switches with up to +/-12V switching range from a single 3.
3V or 5V supply
· Low RON: 10W max at 25°C · Robust CMOS Silicon-on-Insulator (SOI) technology · Switch nodes are open-circuit when chip is powered down · SOI switch isolation with 1nA typical Off leakage · ESD protection > 4KV HBM · Fast switching time with break-before-...
Similar Datasheet
