Single unbuffered inverter
Description
74HC1GU04
Single unbuffered inverter
Rev.
7 — 4 February 2022
Product data sheet
1.
General description
The 74HC1GU04 is a single unbuffered inverter.
Inputs include clamp diodes.
This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2.
Features and benefits
• Wide supply voltage range from 2.
0 to 6.
0 V • High noise immunity • Symmetrical output impedance • CMOS low power dissipation • Balanced propagation delays • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • Complies with JEDEC standards
• JESD8C (2.
7 V to 3.
6 V) • JESD7A (2.
0 V to 6.
0 V) • ESD protection: • HBM EIA/JESD22-A114-A exceeds 2000V • MM EIA/JESD22-A115-A exceeds 200V • Specified from -40 °C to 85 °C and -40 °C to 125 °C
3.
Ordering information
Table 1.
Ordering information
Type number
Package
Temperature range
74HC1GU04GW -40 °C to +125 °C
74HC1GU04GV -40 °C to +125 °C
Name TSSOP5
SC-74A
Description
plastic thin shrink small outline package; 5 leads; body width 1.
25 mm
plastic surface-mounted package; 5 leads
Version SOT353-1
SOT753
4.
Marking
Table 2.
Marking codes Type number 74HC1GU04GW 74HC1GU04GV
Marking[1] HD HU4
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
Nexperia
5.
Functional diagram
2A
Y4
mna043
Fig.
1.
Logic symbol
1
2
4
mna044
Fig.
2.
IEC logic symbol
6.
Pinning information
74HC1GU04
Single unbuffered inverter
A
Y
mna045
Fig.
3.
Logic diagram
6.
1.
Pinning
74HC1GU04
n.
c.
1 A2
5 VCC
GND 3
4Y
001aaf105
Fig.
4.
Pin configuration SOT353-1 (TSSOP5) and SOT753 (SC-74A)
6.
2.
Pin description
Table 3.
Pin description
Symbol
Pin
n.
c.
1
A
2
GND
3
Y
4
VCC
5
7.
Functional description
Table 4.
Function table H = HIGH voltage level; L = LOW voltage level Input A L H
Output Y H L
Description not connected data input ground (0 V) data output supply voltage
74HC1GU04
Product data sheet
All information provided in this document is s...
Similar Datasheet
