Transient Voltage Suppression Diodes
Description
5.
0SMDJ Series
Surface Mount – 5000W
TVS Diode Datasheet
RoHS Pb e3
Uni-directional
Bi-directional
Additional Information
Resources Agency
Accessories
Samples
Agency Approvals
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation at TL=25OC by 10/1000µs Waveform (Fig.
2)(Note 1), PPPM 5000 W (Note 2)
Power Dissipation on Infinite Heat Sink at TL=50OC
PD
Peak Forward Surge Current, 8.
3ms Single Half Sine Wave (Note 3)
IFSM
6.
5 W 300 A
Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only
VF
5.
0
V
Operating Temperature Range
Storage Temperature Range
Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient
TJ -65 to 150 °C TSTG -65 to 175 °C
RƟJL
15 °C/W
RƟJA
75 °C/W
Notes: 1.
Non-repetitive current pulse , per Fig.
4 and derated above TJ (initial) =25OC per Fig.
3.
2.
Mounted on copper pad area of 0.
31x0.
31” (8.
0 x 8.
0mm) to each terminal.
3.
Measured on 8.
3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle = 4 per minute maximum.
Description
The 5.
0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features & Benefits
■ 5000W peak pulse power
■ Typical IR less than 5μA when
capability at 10/1000μs
VBR min>22V
waveform, repetition rate (duty ■ High temperature to reflow
cycles):0.
01%
soldering guaranteed:
■ SMD low profile surface
260°C/40sec
mount package minimizing PCB footprint
■ VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature
■ Typical failure mode is short
Coefficient,)
from over-specified voltage or ■ UL Recognized compound
current
meeting flammability rating V-0
■ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■ Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
■...
Similar Datasheet
