CCD IMAGE SENSOR
Description
KAF-1603
1536 (H) x 1024 (V) Full Frame CCD Image Sensor
Description
The KAF−1603 Image Sensor is a high performance monochrome area CCD (charge-coupled device) image sensor with 1536 (H) × 1024 (V) photoactive pixels designed for a wide range of image sensing applications.
The sensor incorporates true two-phase CCD technology, simplifying the support circuits required to drive the sensor as well as reducing dark current without compromising charge capacity.
The sensor also utilizes the TRUESENSE Transparent Gate Electrode to improve sensitivity compared to the use of a standard front side illuminated polysilicon electrode.
Optional microlenses focus the majority of the light through the transparent gate, increasing the optical response further.
Table 1.
GENERAL SPECIFICATIONS
Parameter
Typical Value
Architecture
Full Frame CCD
Total Number of Pixels
1552 (H) × 1032 (V)
Number of Active Pixels
1536 (H) × 1024 (V) = approx.
1.
6 Mp
Pixel Size Active Image Size
9.
0 mm (H) × 9.
0 mm (V)
13.
8 mm (H) × 9.
2 mm (V) 16.
6 mm (Diagonal) 1″ Optical Format
Die Size
15.
5 mm (H) × 10.
0 mm (V)
Aspect Ratio
3:2
Saturation Signal Output Sensitivity
100,000 electrons 10 mV/e−
Quantum Efficiency (with Microlens)
Peak: 77% 400 nm: 45%
Quantum Efficiency (no Microlens)
Peak: 65% 400 nm: 30%
Read Noise Dark Current
15 electrons < 10 pA/cm2
Dark Current Doubling Temperature
6.
3°C
Dynamic Range
74 dB
Charge Transfer Efficiency
> 0.
99999
Blooming Suppression
None
Maximum Date Rate
10 MHz
Package
CERDIP Package (Sidebrazed)
Cover Glass
Clear or AR Coated, 2 Sides
NOTE: Parameters above are specified at T = 25°C unless otherwise noted.
www.
onsemi.
com
Figure 1.
KAF−1603 CCD Image Sensor Features
• True Two Phase Full Frame Architecture • TRUESENSE Transparent Gate Electrode
for High Sensitivity Applications
• Scientific Imaging
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet.
© Semiconductor Components Indu...
Similar Datasheet