Phototriac Coupler
Description
PC3SD12NTZ Series
PC3SD12NTZ Series
VDRM : 600V, Cost effective Non-zero cross type DIP 6pin Phototriac Coupler for triggering
■ Description
PC3SD12NTZ Series Phototriac Coupler include an infrared emitting diode (IRED) optically coupled to an output Phototriac.
These devices feature full wave control and are ideal isolated drivers for medium to high current Triacs.
DIP package provides 5.
0kV isolation from input to output with superior commutative noise immunity.
■ Features
1.
High repetitive peak off-state voltage (VDRM : 600V) 2.
Non-zero crossing functionality 3.
6 pin DIP package 4.
Superior noise immunity (dV/dt : MIN.
1 000V/µs) 5.
Double transfer mold construction (Ideal for Flow
Soldering) 6.
High isolation voltage between input and output
(Viso(rms) : 5.
0kV)
■ Agency approvals/Compliance
1.
Recognized by UL1577 (Double protection isolation), file No.
E64380 (as model No.
3SD12)
2.
Approved by CSA, file No.
CA95323 (as model No.
3SD12)
3.
Optionary available VDE Approved (∗)(DIN EN 607475-2), file No.
40008189 (as model No.
3SD12)
4.
Package resin : UL flammability grade (94V-0)
(∗) DIN EN60747-5-2 : successor standard of DIN VDE0884.
Up to Date code "RD" (December 2003), approval of DIN VDE0884.
From Date code "S1" (January 2004), approval of DIN EN60747-5-2.
(∗∗) Reinforced insulation type is also available.
(PC3SF11YVZ Series)
■ Applications
1.
Triggering for Triacs used to switch on and off devices which require AC Loads.
For example heaters, fans, motors, solenoids, and valves.
2.
Triggering for Triacs used for implementing phase control in applications such as lighting control and temperature control (HVAC).
3.
AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Contact SHARP in order ...
Similar Datasheet
