TVS Diodes
Description
1.
5SMC Series
TVS Diodes
Surface Mount – 1500W > 1.
5SMC series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.
2) by 10/1000us Test Waveform(Fig.
4) (Note 1),(Note 2) -Single Die Parts)
PPPM
1500
W
Peak Pulse Power Dissipation(Fig.
2) by 10/1000us Test Waveform(Fig.
4) (Note 1), (Note 2)-Stacked Die Parts (Note 5)
PPPM
2000
W
Power Dissipation on Infinite Heat Sink at TL=50OC
PD
6.
5
W
Peak Forward Surge Current, 8.
3ms Single Half Sine Wave (Note 3)
IFSM
200
A
Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 4)
VF
3.
5/5.
0 V
Operating Temperature Range
TJ -65 to 150 °C
Storage Temperature Range
TSTG -65 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
15 °C/W
Typical Thermal Resistance Junction to Ambient RƟJA
75 °C/W
Notes:
1.
Non-repetitive current pulse , per Fig.
4 and derated above TJ (initial) =25OC per Fig.
3.
2.
Mounted on copper pad area of 0.
31x0.
31” (8.
0 x 8.
0mm) to each terminal.
3.
Measured on 8.
3ms single half sine wave or equivalent square wave for unidirectional device only, duty
cycle=4 per minute maximum.
4.
VF < 3.
5V for single die parts and VF< 5.
0V for stacked-die parts.
5.
For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics.
Functional Diagram
Cathode
Bi-directional Uni-directional
Anode
Descriptios
The 1.
5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
• 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.
01%
• Excellent clamping capability
• Low incremental surge resistance
• Typical IR less than 1μA when VBR min>12V
• For surface mounted applications to optimize board spac...
Similar Datasheet