Document
F12K120
F12K120
Protectifiers® – LowVF-Rectifier with Overvoltage Protection Protectifiers® – LowVF-Gleichrichter mit Überspannungs-Schutz
Version 2010-06-02
Nominal current Nennstrom
Ø 8 ±0.1
Stand off voltage Sperrspannung
62.5 ±0.5 7,5 ±0.1
Plastic case Kunststoffgehäuse Type Weight approx. Gewicht ca.
Ø 1.2 ±0.05 Dimensions - Maße [mm]
Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack
12 A 120 V Ø 8 x 7.5 [mm] 1.3 g
Low forward losses, high reverse pulse power capability Niedrige Durchlass-Verluste, hohe Rückwärts-Pulsbelastbarkeit
Maximum ratings and Charactistics (TJ = 25°C)
Type Typ
Stand-off voltage Sperrspannung
Max. rev. current Max. Sperrstrom
at/bei VWM
VWM [V]
ID [µA]
F12K120
120
5
Grenz- und Kennwerte (TJ = 25°C)
Breakdown voltage Abbruch-Spannung
Forward voltage Durchlass-Spannung
VF [V] 1)
VBR min [V] @ IT [mA]
IF = 5A
IF = 12A
130
5
< 0.82
< 0.9
Max. average forward rectified current, R-load Dauergrenzstrom in Einwegschaltung mit R-Last Total steady state power dissipation Gesamtverlustleistung im Dauerbetrieb Repetitive peak forward current Periodischer Spitzenstrom Peak forward surge current, 50/60 Hz half sine-wave Stoßstrom für eine 50/60 Hz Sinus-Halbwelle Rating for fusing, t < 10 ms Grenzlastintegral, t < 10 ms Junction temperature – Sperrschichttemperatur
in DC forward mode – bei Gleichstrom-Durchlassbetrieb Storage temperature – Lagerungstemperatur
TA = 50°C TA = 50°C f > 15 Hz TA = 25°C TA = 25°C
IFAV 12 A 2) Ptot 8 W IFRM 80 A 1) IFSM 375/390 A i2t 680 A2s Tj -50...+175°C Tj +200°C TS -50...+175°C
1 Tj = 25°C 2 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
© Diotec Semiconductor AG
http://www.diotec.com/
1
F12K120
Characteristics
Leakage current Sperrstrom
Tj = 25°C VR = VWM Tj = 100°C VR = VWM
ESD rating according to JESD22-A114 / contact discharge C = 100pF R = 1.5kΩ ESD-Festigkeit gemäß JESD22-A114 / Kontaktentladung
Peak pulse power dissipation Impuls-Verlustleistung
10/1000µs pulse 1) TA = 25°C
Max. reverse peak pulse current
8/20µs pulse 2)
Max. Impuls-Strom in Sperr-Richtung
TA = 25°C
Reverse recovery time Sperrverzug
IF = 0.5 A through/über IR = 1 A to IR = 0.25 A
Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft
Thermal resistance junction to leads Wärmewiderstand Sperrschicht – Anschlussdraht
Kennwerte IR < 5 µA IR < 200 µA
20 kV
PPPM 1500 W
IPPM 230 A
trr < 300 ns
RthA < 10 K/W 3)
RthL < 2 K/W
120 [%] 100
80
60
40
20 IFAV
0 0 TC 50 100 150 [°C] Rated forward current vs. temp. of the case Zul. Richtstrom in Abh. v. d. Temp. Des Gehäuses
103 [A] 102 Tj = 125°C
10 Tj = 25°C
1
IF
10-1
400a-(5a-0,8v)
0.4 VF 0.8 1.0 1.2 1.4 [V] 1.8
Forward characteristics (typical values.