Continental Device India Limited
An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company
SCHOTTKY BARRIER RECTIFIERS
SR120 to SR1100
DO-41P Axial Lead Plastic Package
For use in Low Voltage, High Frequency Inverters, Free Wheeling and Polarity Protection Applications
Polarity: Colour band denotes cathode end
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at Ta=25oC Ambient Temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%
ELECTRICAL CHARACTERISTICS
DESCRIPTION
SYMBOL SR120 SR130 SR140 SR150 SR160 SR180 SR1100 UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60 80 100
V
Maximum RMS Voltage
VRMS 14 21 28 35 42 56 70 V
Maximum DC Blocking Voltage
VDC 20 30 40 50 60 80 100 V
Maximum Average Forward Rectified Current 0.375" (9.5mm) Lead Length at TL=100ÂșC
I(AV)
1.0
A
Peak Forward Surge Current, 8.3ms single
half sine wave superimposed on rated load (JEDEC method)
IFSM
40
Maximum Forward Voltage at 1.0 A Maximum DC Reverse Current at Tj=25oC at Rated DC Blocking Voltage at Tj=100oC
Typical Junction Capacitance
VF 0.45 0.55 0.6
0.7
1.0 IR 10
*CJ 110
0.85 80
Typical Thermal Resistance
**Rth (J-L)
15
Operating Junction Temperature Range
TJ
- 55 to +150
Storage Temperature Range
Tstg
- 55 to +150
A
V mA mA pF oC/W oC oC
*Measured at 1MHz and applied reverse voltage of 4.0 V **Thermal Resistance Junction to Lead
SR120_1100 Rev110607E
Continental Device India Limited
Data Sheet
Page 1 of 5
DO-41P Axial Lead Plastic Package
SR120 to SR1100
DO-41P Axial Lead Plastic Package
52mm - DO-41P Package DIM Min Max A 25.40
B 4.20 5.20 C 0.70 0.90 D 2.00 2.70 All Dimensions are in mm
26mm - DO-41P Package DIM Min Max A 14.60
B 4.10 5.20 C 0.71 0.86 D 2.00 2.70 All Dimensions are in mm
SR120_1100 Rev110607E
Continental Device India Limited
Data Sheet
Page 2 of 5
AMMO PACKING FOR DO-41P
SR120 to SR1100
DO-41P Axial Lead Plastic Package
All Dimensions are in mm
Packaging Information
Package/ Packaging Case Type Type
Std. Packing Qty
DO-41P (52mm)
T&A
DO-41P (26mm)
T&A
T & A: Tape and Ammo Pack
SR120_1100 Rev110607E
5,000 3,000
Inner Carton
Outer Carton
Qty
Size L x W x H
Gross Weight
Qty
Gross Size L x W x H Weig
ht
(cm)
(Kg)
(cm)
(Kg)
5K 27 x 8 x 14
1.96 45K 46 x 35 x 25 17.5
50 x 6.5 x 31
Continental Device India Limited
Data Sheet
Page 3 of 5
AXIAL TAPE FOR DO-41P
SR120 to SR1100
DO-41P Axial Lead Plastic Package
DO-41P 52 mm Tape
DIM Min Max A 50.0 54.0
B 95.0 105.0
C 5.60 6.50 D 1.5R E 9.50 10.50 F 1.25 All Dimensions are in mm
DO-41P 26 mm Tape DIM Min Max A 26.0 26.4 B 50.0 60.0 C 5.00 6.00 D 1.5R E 4.50 5.50 F 0.8
TAPE SPECIFICATIONS
1. 300 mm (Min) leader tape on every roll.
2. No. of empty places allowed 0.25% without consecutive empty places.
3. Ends of leads shall normally not protrude beyond the tapes.
4. Components shall be held sufficiently in the tape or tapes so that they can not come free in normal handling.
SR120_1100 Rev110607E
Continental Device India Limited
Data Sheet
Page 4 of 5
SR120 to SR1100 DO-41P Axial Lead Plastic Package
Component Disposal Instructions
1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country.
2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE).
Customer Note
Disclaimer
The product information and the selection guides facilitate selection of the CDIL's Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s).
CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.
CDIL is a registered Trademark of
Continental Device India Limited
C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119
[email protected] www.cdilsemi.com
SR120_1100 Rev140607.