RF Digital Attenuator
Product Description
The PE43204 is a 50Ω, HaRP™-enhanced, high linearity, 2-bit RF Digital Step Attenuator (DSA) coverin...
Description
Product Description
The PE43204 is a 50Ω, HaRP™-enhanced, high linearity, 2-bit RF Digital Step Attenuator (DSA) covering an 18 dB attenuation range in 6 dB steps. With a parallel control interface, it maintains high attenuation accuracy, fast switching speed, low insertion loss and low power consumption. This next generation Peregrine DSA is available in a 3x3 mm 12lead QFN footprint.
The PE43204 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS.
Product Specification
PE43204
50 Ω RF Digital Attenuator 2-bit; 0, 6, 12, and 18 dB States
Features HaRP™-enhanced UltraCMOS™ device Fast switching speed: Typical 26 ns High Linearity: Typical +61 dBm IP3 Small α-Error Best in class 2000 V HBM ESD tolerance Attenuation: 6, 12, and 18 dB States Parallel Control CMOS Compatible Packaged in a 12-lead 3x3x0.85 mm QFN
Figure 1. Package Type
12-lead 3x3x0.85 mm QFN Package
Figure 2. Functional Schematic Diagram
Switched Attenuator Array
RF Input
RF Output
Parallel Control 2
Control Logic Interface
Document No. 70-0257-03 │ www.psemi.com
©2008-2009 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 8
PE43204
Product Specification
Attenuation (dB.)
Table 1. Electrical Specifications @ +25°C, VDD = 3.3 V
Parameter
Test Conditions
Frequency Range Attenuation Range Insertion Loss...
Similar Datasheet