RGP15D

RGP15A THRU RGP15M FAST SWITCHING RECTIFIERS GLASS PASSIVATED JUNCTION Reverse Voltage – 50 to 1000 Volts Forward Current – 1.5 Amperes Features High temperature metallurgically bonded construction Cavity-free glass passivated junction. 1.5 Ampere operation at TA = 55oC with no thermal runaway. Typical IR less than 0.1µA High temperature soldering guaranteed: 350oC/10seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-204AC, molded plastic over glass body. Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Absolute Maximum Ratings and Characteristics Ratings at 25oCambient temperature unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375” (9.5mm) lead length at TA = 55 OC Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum full load reverse current, full cycle average 0.375” (9.5mm) lead length at TA = 55 OC Maximum instantaneous forward voltage at 1.5A Maximum DC reverse current TA = 25 OC at rated DC blocking voltage TA = 150OC Maximum reverse recovery time IF=0.5A, IR=1A, Irr=0.25A. Typical junction capacitance at 4 V, 1MHz Typical thermal resistance (Note 1) Operating junction and storage temperature range Symbols RGP 15A VRRM VRMS VDC 50 35 50 IF(AV) IFSM IR(AV) VF ...