SINGLE-PHASE BRIDGE RECTIFIER
SINGLE-PHASE BRIDGE RECTIFIER
DF005 THRU DF10 DB101 THRU DB107
VOLTAGE RANGE CURRENT
50 to 1000 Volts 1.0 Ampere
FEA...
Description
SINGLE-PHASE BRIDGE RECTIFIER
DF005 THRU DF10 DB101 THRU DB107
VOLTAGE RANGE CURRENT
50 to 1000 Volts 1.0 Ampere
FEATURES
Glass passivated chip junction High forward surge current capability Ideal for printed circuit board High temperature soldering guaranteed:
260℃/10 seconds at terminals
MECHANICAL DATA
Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Terminals solderable per MIL-STD-202E
method 208C Polarity: Molded on body Mounting position: Any Weight: 0.04 ounce, 1.0 gram
DFM
.365 (9.3) .320 (8.12)
.020 (0.5)
.205 (5.2) .195 (5.0)
.135 (3.4) .115 (2.9)
.165 (4.2) .155 (3.9)
.060 (1.5)
-+ ~~
.255 (6.5) .245 (6.2)
.350 (8.9) .300 (7.6)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
DF005 DB101
DF01 DB102
Maximum Reverse Peak Repetitive Voltage Maximum RMS Voltage
VRRM 50 100 VRMS 35 70
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output Current, 0.06”(1.5mm) lead length at TA=40℃ (Note 2)
Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t<8.3ms)
VDC I(AV)
IFSM I2t
50 100
Maximum Instantaneous Forward Voltage drop Per Bridge element 1.0A
VF
Maximum Reverse Current at rated DC blocking voltage per element
TA=25℃ TA=...
Similar Datasheet