DatasheetsPDF.com

SMDJ7.5C Dataheets PDF



Part Number SMDJ7.5C
Manufacturers UN Semiconducctor
Logo UN Semiconducctor
Description Surface Mount Transient Voltage Suppressors
Datasheet SMDJ7.5C DatasheetSMDJ7.5C Datasheet (PDF)

Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Description The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs .

  SMDJ7.5C   SMDJ7.5C


Document
Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Description The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead–free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) Uni-directional Bi-directional Functional Diagram Cathode Bi-directional Uni-direction Anode Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Maximum Ratings (TA=25℃ unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note 1), (Note 2) Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power Dissipation on Infinite Heat Sink at TL=75°C Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) PPPM IPP PM(AV) IFSM VF Operating junction and Storage Temperature Range. TJ , TSTG Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. Value 3000 See Next Table 6.0 300 3.5/5.0 -55 to +150 Unit Watts Amps Watt Amps Voltage °C UN Semiconductor Co., Ltd. Revision October 18, 2013 1/7 www.unsemi.com.tw @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Electrical Characteristics (TA=25℃ unless otherwise noted) Part Number Uni SMDJ5.0 SMDJ5.0A SMDJ6.0 SMDJ6.0A SMDJ6.5 SMDJ6.5A SMDJ7.0 SMDJ7.0A SMDJ7.5 SMDJ7.5A SMDJ8.0 SMDJ8.0A SMDJ8.5 SMDJ8.5A SMDJ9.0 SMDJ9.0A SMDJ10 SMDJ10A SMDJ11 SMDJ11A SMDJ12 SMDJ12A SMDJ13 SMDJ13A SMDJ14 SMDJ14A SMDJ15 SMDJ15A SMDJ16 SMDJ16A SMDJ17 SMDJ17A SMDJ18 SMDJ18A SMDJ19 SMDJ19A SMDJ20 SMDJ20A SMDJ22 SMDJ22A SMDJ24 SMDJ24A SMDJ26 SMDJ26A SMDJ28 SMDJ28A SMDJ30 SMDJ30A SMDJ33 SMDJ33A SMDJ36 SMDJ36A SMDJ40 SMDJ40A SMDJ43 SMDJ43A Bi SMDJ5.0C SMDJ5.0CA SMDJ6.0C SMDJ6.0CA SMDJ6.5C SMDJ6.5CA SMDJ7.0C SMDJ7.0CA SMDJ7.5C SMDJ7.5CA SMDJ8.0C SMDJ8.0CA SMDJ8.5C SMDJ8.5CA SMDJ9.0C SMDJ9.0CA SMDJ10C SMDJ10CA SMDJ11C SMDJ11CA SMDJ12C SMDJ12CA SMDJ13C SMDJ13CA SMDJ14C SMDJ14CA SMDJ15C SMDJ15CA SMDJ16C SMDJ16CA SMDJ17C SMDJ17CA SMDJ18C SMDJ18CA SMDJ19C SMDJ19CA SMDJ20C SMDJ20CA SMDJ22C SMDJ22CA SMDJ24C SMDJ24CA SMDJ26C SMDJ26CA SMDJ28C SMDJ28CA SMDJ30C SMDJ30CA SMDJ33C SMDJ33CA SMDJ36C SMDJ36CA SMDJ40C SMDJ40CA SMDJ43C SMDJ43CA Marking Uni RDD RDE RDF RDG RDH RDK RDL PDM PDN PDP PDQ PDR PDS PDT PDU PDV PDW PDX PDY PDZ PED PEE PEF PEG PEH PEK PEL PEM PEN PEP PEQ PER PES PET PEA PEB PEU PEV PEW PEX PEY PEZ PFD PFE PFF PFG PFH PFK PFL PFM PFN PFP PFQ PFR PFS PFT Bi DDD DDE DDF DDG DDH DDK DDL DDM DDN DDP DDQ DDR DDS DDT DDU DDV DDW DDX DDY DDZ DED DEE DEF DEG DEH DEK DEL DEM DEN DEP DEQ DER DES DET DEA DEB DEU DEV DEW DEX DEY DEZ DFD DFE DFF DFG DFH DFK DFL DFM DFN DFP DFQ DFR DFS DFT Reverse Stand-Off Voltage VRWM (V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 19.0 19.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 40.0 40.0 43.0 43.0 Breakdown Voltage VBR (V) @IT MIN MAX 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.00 10.00 11.10 11.10 12.20 12.20 13.30 13.30 14.40 14.40 15.60 15.60 16.70 16.70 17.80 17.80 18.90 18.90 20.00 20.00 21.13 21.10 22.20 22.20 24.40 24.40 26.70 26.70 28.90 28.90 31.10 31.10 33.30 33.30 36.70 36.70 40.00 40.00 44.40 44.40 47.80 47.80 7.30 7.3070 87.1357 7.37 8.82 7.98 9.51 8.60 10.20 9.21 10.90 9.83 11.50 10.40 12.20 11.10 13.60 12.30 1.


SMDJ7.0CA SMDJ7.5C SMDJ7.5CA


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)