CPC1945G

CPC1945G AC Solid State Relay AC Operating Voltage Load Current On-State Voltage Drop CPC1945G 120 1.0 1.6 Units VRMS A VRMS (at IL=1.0A) Features Load Current up to 1A Blocking Voltage to 400V 5mA Sensitivity Zero-Crossing Detection DC Control, AC Output Optically Isolated TTL and CMOS Compatible Low EMI and RFI Generation High Noise Immunity VDE compatible Machine Insertable, Wave Solderable Description The CPC1945G is a AC Solid State Switch using patented waveguide coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The CPC1945G switches are robust enough to provide a blocking voltage of up to 400V. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750V of isolation and noise immunity between control and load circuits. As a result the CPC1945G is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical relays. Approvals UL recognized file #: Pending Ordering Information Part # CPC1945G Description 16 Pin DIP (25/Tube) Applications Programmable Control Process Control Power Control Panels Remote Switching Gas Pump Electronics Contractors Large Relays Solenoids Motors Heaters Pin Configuration CPC1965G 1 – LED 16 + LED ZC 10 8 AC Load AC Load DS-CPC1945G-R1 www.clare.com 1...