ALN0667WT

plerowTM ALN0667WT Internally Matched LNA Module Features · S21 = 18.5 dB @ 470 MHz = 15.5 dB @ 860 MHz · NF of 1.1 dB over Frequency · Unconditionally Stable · Single 5V Supply · High OIP3 @ Low Current Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Specifications (in Production) Typ. @ T = 25C, Vs = 5 V, Freq. = 665MHz, Zo.sys = 75 ohm Parameter Specifications Unit Min Typ Max Frequency Range MHz 470 860 Gain Gain Flatness Noise Figure (NF) Output IP3 (1) S11 / S22 (2) dB dB dB dBm dB 16 17  1.5  1.7 1.1 1.2 29 30 -9 / -9 Output P1dB dBm 20 21 Switching Time Supply Current Supply Voltage Impedance Max. RF Input Power sec mA V  dBm 40 60 5 75 C.W 23 ~ 25 (before fail) Package Type & Size mm Surface Mo...