ADM8843

Four White LED Backlight Driver ADM8843 FEATURES Drives 4 LEDs from a 2.6 V to 5.5 V (Li-Ion) input supply 1×/1.5×/2× fractional charge pump to maximize power efficiency 0.3% typical LED current matching Up to 88% power efficiency over Li-Ion range Powers main and sub display LEDs with individual shutdown Package footprint only 9 mm2 (3 mm × 3 mm) Package height only 0.55 mm Low power shutdown mode Shutdown function Soft start limiting in-rush current APPLICATIONS Cellular phones with main and sub displays White LED backlighting Camera flash/strobes and movie light applications Micro TFT color displays DSC PDAs GENERAL DESCRIPTION The ADM8843 uses charge pump technology to provide the power to drive up to four LEDs. The LEDs are used for backlighting a color LCD display that has regulated constant current for uniform brightness intensity. The main display can use up to three LEDs, and the sub display uses one LED. The CTRL1 and CTRL2 digital input control pins control the shutdown operation and the brightness of the main and sub displays. To maximize power efficiency, the charge pump can operate in 1×, 1.5×, or 2× mode. The charge pump automatically switches among 1×/1.5×/2× modes, based on the input voltage, to maintain sufficient drive for the LED anodes at the highest power efficiency. Improved brightness matching of the LEDs is achieved by a feedback pin that senses individual LED current with a typical matching accuracy of 0.3%. FUNCTIONAL BLOCK DIAGRAM C1 C2 1μF 1μF ...