GP15M

GP15A THRU GP15M Features 1.5 AMPS. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 1.5 Amperes DO-15 High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.5 amperes operation at TA=55oC and with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-15 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.015 ounce, 0.4 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol GP GP GP GP GP 15A 15B 15D 15G 15J Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 Maximum RMS Voltage VRMS 35 70 140 280 420 Maximum DC Blocking Voltage VDC 50 100 200 400 600 Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length at TA=55℃ I(AV) 1.5 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 Maximum Instantaneous Forward Volt...