Glass Passivated Junction Plastic Rectifiers
GP15A THRU GP15M
Features
1.5 AMPS. Glass Passivated Junction Plastic Rectifiers
Voltage Range 50 to 1000 Volts
Curren...
Description
GP15A THRU GP15M
Features
1.5 AMPS. Glass Passivated Junction Plastic Rectifiers
Voltage Range 50 to 1000 Volts
Current 1.5 Amperes
DO-15
High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.5 amperes operation at TA=55oC and with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-15 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.015 ounce, 0.4 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
Symbol GP GP GP GP GP 15A 15B 15D 15G 15J
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600
Maximum RMS Voltage
VRMS 35 70 140 280 420
Maximum DC Blocking Voltage
VDC 50 100 200 400 600
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length at TA=55℃
I(AV)
1.5
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load (JEDEC method )
IFSM
50
Maximum Instantaneous Forward Volt...
Similar Datasheet