2M BIT SPI NOR FLASH
ACE25C200G
2M BIT SPI NOR FLASH
Description The ACE25C200G is 2M-bit Serial Peripheral Interface(SPI) Flash memory, and ...
Description
ACE25C200G
2M BIT SPI NOR FLASH
Description The ACE25C200G is 2M-bit Serial Peripheral Interface(SPI) Flash memory, and supports the
Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (/WP), and I/O3 (/HOLD). The Dual I/O data is transferred with speed of 216Mbits/s and the Quad I/O & Quad output data is
transferred with speed of 432Mbits/s. The device uses a single low voltage power supply, ranging from 2.7 Volt to 3.6 Volt.
Additionally, the device supports JEDEC standard manufacturer and device ID and three 256-bytes Security Registers..
Features
● Serial Peripheral Interface (SPI) - Standard SPI: SCLK, /CS, SI, SO, /WP, /HOLD - Dual SPI: SCLK, /CS, IO0, IO1, /WP, /HOLD - Quad SPI: SCLK, /CS, IO0, IO1, IO2, IO3
● Read - Normal Read (Serial): 50MHz clock rate - Fast Read (Serial): 108MHz clock rate - Dual/Quad (Multi-I/O) Read: 108MHz clock rate
● Program - Serial-input Page Program up to 256bytes -Program Suspend and Resume
● Erase - Block erase (64/32 KB) - Sector erase (4 KB) - Chip erase - Erase Suspend and Resume
● Program/Erase Speed - Page Program time: 0.7ms typical - Sector Erase time: 60ms typical - Block Erase time: 0.3/0.5s typical - Chip Erase time: 2s typical
● Flexible Architecture -Sector of 4K-byte -Block of 32/64K-byte
● Low Power Consumption - 20mA maximum active current - 5uA maximum power down current
VER 1.1 1
● Software/Hardware Write Protection - 3x256-Byte Security Registers with OTP Lock - Enable/Disable protection wi...
Similar Datasheet