SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
KBJ4005G THRU KBJ410G
VOLTAGE RANGE CURRENT
50 to 1000 Volts 4.0 Amperes
FEATURES
• Plastic package has UL Flammability Glassification 94V-0
• Glass passivated chip junctions • High case dielectric strength of 1500 VRMS • High surge current capability • High temperature soldering guaranteed
260℃/10 seconds, 0.375”(9.5mm) lead length
KBJ
3.0×45 O
24.8-25.2 φ3. 1 - 3 . 4
4.4-4.8 3.4-3.8
3.3-3.7 17.2-17.8 3.6 14.7-15.3
9.3-9.7
MECHANICAL DATA
• Case: molded plastic body • Terminal: Plated leads solderable per MIL-STD-750
Method 2026
• Mounting position: Any (Note 4) • Mounting Torque: 6 in – 1bs max. • Weight: 0.15 ounce,4.0 gram
1.5-1.9 0.8-1.0
0.9-1.1 7.3-7.7 7.2-7.7 7.3-7.7
2.8-3.2 0.6-0.8
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified • Single Phase, half wave, 60Hz, resistive or inductive load • For capacitive load derate current by 20%
SYMBOLS
KBJ 4005G
KBJ 401G
KBJ 402G
KBJ 404G
KBJ 406G
KBJ 408G
Maximum Reverse Peak Repetitive Voltage
VRRM
50 100 200 400 600 800
Maximum RMS Voltage
VRMS 35 70 140 280 420 560
Maximum DC Blocking Voltage
Maximum Average Forward TC=100℃(Note 1)
Rectified Current, At
TA=40℃(Note 2)
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
rated load (JEDEC Method)
Rating for Fusing (t<8.3ms)
VDC I(AV)
IFSM I2t
50 100 200 400 600 800 4.0 3.0
120
60
Maximum Instantaneous Forward Voltage drop Per leg at 2.0A
VF
1.0
Maximum DC Reverse Current at
TA=25℃
rated DC blocking voltage per element TA=125℃
IR
5.0 500
Typical Junction Capacitance, per let (Note 3)
CJ
100.0
45.0
Typical Thermal Resistance (Note 1)
RJA
22.0
Operating Junction Temperature Range
TJ
(-55 to +150)
Storage Temperature Range
TSTG
(-55 to +150)
Notes: 1. Unit mounted on 1.6×1.6×0.06” thick (4.0×4.0×0.15cm) AL. plate
2. Unit mounted on P.C.B. With 0.5×0.5”(1.2×1.2mm) copper pads and 0.375”(9.5mm) lead length
3. Measured at 1.0 MHz and applied reverse voltage of 4.0 V
4. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum
Heat transfer with #6 screws
KBJ 410G 1000
700
100
UNIT Volts Volts Volts Amps
Amps A2s Volts
μA
pF ℃/W ℃/W
℃
E-mail:
[email protected] Web Site: www.cnmic.com
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
KBJ4005G THRU KBJ410G
VOLTAGE RANGE CURRENT
50 to 1000Volts 4.0 Amperes
AVERAGE FORWARD OUTPUT,CURRENT (A)
INSTANTANEOUS FORWARD CURRENT, (A)
RATINGS AND CHARACTERISTIC CURVES KBJ4005G THRU KBJ410G
FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT
4.0 Heat-Sink Mounting, Tc 1.6×1.6×0.06"Thk (4.0×4.0×0.15cm) AL. Plate
3.0
FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG
150 TJ = T J max. Single Sine-Wave (JEDEC Method)
100
2.0
PEAK FORWARD SURGE, CURRENT,(A)
1.0 P.C.B. Mounting, TA 0.47×0.47"(12×12mm) Copper pads 0.375"(9.5mm) lead length 60 Hz Resistive or Inductive Load
0
0 .