RS07B-RS07M
Surface Mount Rectifiers
REVERSE VOLTAGE: 100 - 1000 V CURRENT: 0.7 A
Features
Glass passivated device Ideal for surface mouted applications Low leakage current Metallurgically bonded construction High temperature soldering:
250/10 seconds at terminals
1.9± 0.1
SOD - 123FL
Cathode Band Top View
2.8 0.1
1.0 0.2
0.10-0.30
1.4± 0.15
Mechanical Data
Case:JEDEC SOD-123FL,molded plastic over passivated chip
Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end Weight: 0.0008 ounces, 0.022 gram Mounting position: Any
0.6 0.25 3.7 0.2
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified. Single hase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%.
ABSOLUTE RATINGS
Device marking code
RS07B RS07D RS07G RS07J RS07K RS07M
UNITS
RB RD RG RJ RK RM
Maximum recurrent peak reverse voltage
VRRM
100
200
400
600
800 1000 V
Maximum RMS voltage
VRMS
70
140 280 420 560 700 V
Maximum DC blocking voltage
VDC 100 200 400 600 800 1000 V
Maximum average forword rectified current TA=65 (NOTE 1)
I(AV)
0.7
A
Peak forward surge current 8.3ms single
half-sine-wave superimposed
IFSM
20
A
on rated load TL=25
Typical thermal resistance (NOTE 2)
RjθA
180
Maximum reverse recovery time (NOTE 3)
trr
150 250
Operating temperature range
Tj
- 55 --- + 150
Storage temperature range
TSTG
- 55 --- + 150
NOTES:1.Averaged over any 20 ms period. 2. Thermal resistance junction to ambient, 6.0 mm 2 coppeer pads to each terminal.
3.Measured with IF=0.5A, IR=1A, Irr=0.25A.
K/W 500 ns
http://www.luguang.cn
mail:
[email protected]
ELECTRICAL CHARACTERISTICS
Parameter
Symbol
Min
Maximum instantaneous (NOTE 4) forward voltage at 0.7A
VF
-
Maximum DC reverse current @TA=25 at rated DC blockjing voltage @TA=125
Typical junction capacitance (NOTE 5)
IR Cj
-
NOTES: 4.Pulse test:300µs pulse width,1% duty cycle. 5.Measured at 1.0MHz and applied average voltage of 4.0V DC.
RS07B-RS07M
Surface Mount Rectifiers
Typ.
Max.
Unit
- 1.15 V
- 10 µA
- 50
4 - pF
http://www.luguang.cn
mail:
[email protected]
INSTANTANEOUS FORWARD CURRENT AMPERES
RS07B-RS07M
Surface Mount Rectifiers
Ratings AND Charactieristic Curves
FIG.1 --TYPICAL FORWARD CHARACTERISTIC
FIG.2 -- TYPICAL JUNCTION CAPACITANCE
100
10 TJ=25 Pulse Width=300us
4
2
1.0
0.4
0.2
0.1 0.06 0.04
0.02 0.01
0.6 0.8 1.0 1.2 1.4 1.6
CAPACITANCE, pF
10 9 8 7 6 5 4 3 2 1 0 0
5 10 15 20 25 30 35 40
INSTANTANEOUS FORWARD VOLTAGE,V
REVERSE VOLTAGE,VOLTS
FIG.3 -- TYPICAL INSTANTANEOUS REVERSE CHARACTERISTICS
100
TJ = 150°C 10
TJ = 125°C
TJ = 100°C 1
TJ = 75°C
TJ = 50°C 0.1
0.01 0
TJ = 25°C 100 200 300 400 500 600 700 800 900
INSTANTANEOUS REVERSE VOLTAGE,V
AVERAGE FORWARD CURRENT, AMPERES
FIG.4 -- FORWARD DERATING CURVE
1.2 Resistive or Inductive Load
1.0
0.8
0.6
0.4
0.2 3.0 x 3.0mm 40 µm
Thick Copper Pad Areas
0 0 20 40 60 80
100 120 140
160
AMBIENT TEMPERATURE,
INSTANTANEOUS REVERSE CURRENT µ AMPERES
http://www.luguang.cn
mail:
[email protected]
.