VND7040AJ-E

VND7040AJ-E Double channel high-side driver with MultiSense analog feedback for automotive applications Datasheet - production data PowerSSO-16 GAPGCFT00327 Features Max transient supply voltage VCC Operating voltage range VCC Typ. on-state resistance (per Ch) RON Current limitation (typ) ILIMH Standby current (max) ISTBY 40 V 4 to 28 V 40 mΩ 34 A 0.5 µA General – Double channel smart high side driver with MultiSense analog feedback – Very low standby current – Compatible with 3 V and 5 V CMOS outputs MultiSense diagnostic functions – Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature – Overload and short to ground (power limitation) indication – Thermal shutdown indication – Off-state open-load detection – Output short to VCC detection – Sense enable/ disable Protections – Undervoltage shutdown – Overvoltage clamp – Load current limitation – Self limiting of fast thermal transients – Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin – Loss of ground and loss of VCC – Reverse battery with external components – Electrostatic discharge protection Applications All types of Automotive resistive, inductive and capacitive loads Specially intended for Automotive Signal Lamps (up to P27W or SAE1156 and R5W paralleled or LED Rear Combinations) Description The VND7040AJ-E is a double channel high-side driver manufactured using ST...