high-side driver
VN7004AH-E
High-side driver with CurrentSense analog feedback for automotive applications
Datasheet - production data
...
Description
VN7004AH-E
High-side driver with CurrentSense analog feedback for automotive applications
Datasheet - production data
Features
Octapak
("1($'5
Protections – Undervoltage shutdown – Overvoltage clamp – Load current limitation – Self limiting of fast thermal transients – Loss of ground and loss of VCC – Reverse battery – Electrostatic discharge protection
Applications
Max transient supply voltage Operating voltage range Typ. on-state resistance (per Ch) Current limitation (typ) Stand-by current (max)
VCC 40 V VCC 4 to 28 V RON 4.9 mΩ ILIMH 150 A ISTBY 0.5 µA
Automotive qualified
General – Single channel smart high-side driver with CurrentSense analog feedback – Very low standby current – Compatible with 3.0 V and 5 V CMOS outputs
Diagnostic functions – Overload and short to ground (power limitation) indication – Thermal shutdown indication – OFF-state open-load detection – Output short to VCC detection – Sense enable/ disable
All types of Automotive resistive, inductive and capacitive loads
Specially intended for Automotive Headlamps
Description
The VN7004AH-E is a single channel high-side driver manufactured using ST proprietary VIPower® technology and housed in the Octapak package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics.
The device integrates advanced protective functions such as load current limitation, overload active management by power lim...
Similar Datasheet