Automotive fully integrated H-bridge motor driver
VNH7100AS
Automotive fully integrated H-bridge motor driver
Features
SO-16N
GAPGCFT00648
Type VNH7100AS
RDS(on)
100...
Description
VNH7100AS
Automotive fully integrated H-bridge motor driver
Features
SO-16N
GAPGCFT00648
Type VNH7100AS
RDS(on)
100 mtyp per leg)
Iout VCCmax 12 A 41 V
Automotive qualified
Output current: 15 A
3 V CMOS-compatible inputs
Undervoltage shutdown
Overvoltage clamp
Thermal shutdown
Cross-conduction protection
Current and power limitation
Very low standby power consumption
Protection against loss of ground and loss of VCC
PWM operation up to 20 kHz
MultiSense diagnostic functions – Analog motor current feedback – Output short to ground detection – Thermal shutdown indication – OFF-state open-load detection – Output short to VCC detection
Output protected against short to ground and short to VCC
Standby Mode
Half Bridge Operation Package: ECOPACK®
Datasheet - production data
Description
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches.
Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower® M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in SO-16N package on electrically isolated leadframes.
Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. The input signals INA and INB can directly interface the microcontro...
Similar Datasheet