Double channel high-side driver
VND7140AJ-E
Double channel high-side driver with MultiSense analog feedback for automotive applications
Datasheet - pro...
Description
VND7140AJ-E
Double channel high-side driver with MultiSense analog feedback for automotive applications
Datasheet - production data
Features
Max transient supply voltage
VCC
Operating voltage range
VCC
Typ. on-state resistance (per Ch) RON
Current limitation (typ)
ILIMH
Standby current (max)
ISTBY
40 V 4 to 28 V 140 mΩ
12 A 0.5 µA
Automotive qualified General
– Double channel smart high-side driver with MultiSense analog feedback
– Very low standby current – Compatible with 3 V and 5 V CMOS
outputs
MultiSense diagnostic functions – Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature – Overload and short to ground (power limitation) indication
– Thermal shutdown indication – OFF-state open-load detection
– Output short to VCC detection – Sense enable/ disable
Protections – Undervoltage shutdown – Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
– Loss of ground and loss of VCC – Reverse battery with external components – Electrostatic discharge protection
Applications
All types of Automotive resistive, inductive and capacitive loads
Specially intended for automotive signal lamps (up to R10W or LED Rear Combinations)
Description
The VND7140AJ-E is a double channel high-side driver manufactured using ST proprietary VIPower® technology...
Similar Datasheet