Surface Mount Rectifiers
S07B-S07M
Surface Mount Rectifiers
REVERSE VOLTAGE: 100 - 1000 V CURRENT: 0.7 A
1.0 0.2
0.10-0.30
Features
Glass pas...
Description
S07B-S07M
Surface Mount Rectifiers
REVERSE VOLTAGE: 100 - 1000 V CURRENT: 0.7 A
1.0 0.2
0.10-0.30
Features
Glass passivated device Ideal for surface mouted applications Low leakage current Metallurgically bonded construction High temperature soldering:
250/10 seconds at terminals
Mechanical Data
Case:JEDEC SOD-123FL,molded plastic over passivated chip
Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end Weight: 0.006 ounces, 0.02 gram Mounting position: Any
1.4± 0.15
1.9± 0.1
SOD-123FL
Cathode Band Top View
2.8 0.1
0.6 0.25
3.7 0.2
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%.
ABSOLUTE RATINGS
Device marking code Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forword
rectified current TA=65 (NOTE 1) Peak forward surge current 8.3ms single
VRRM VRMS VDC
I(AV)
S07B D2
100
70
100
S07D D3
200
140
200
S07G D4
400
280
400
S07J D5
600
420
600
0.7
half-sine-wave superimposed
IFSM
25
on rated load TL=25
Typical thermal resistance (NOTE 2)
RjθA
180
Operating temperature range
Tj
- 55 --- + 150
Storage temperature range
TSTG
- 55 --- + 150
NOTES:1.Averaged over any 20 ms period.
2. Thermal resistance junction to ambient, 6.0 mm 2 coppeer pads to each terminal.
S07M ...
Similar Datasheet