High Power PIN Diode
MADP-011029-14150T
High Power PIN Diode 50 MHz - 12 GHz
Features
• 3 Terminal LPF Broadband Shunt Structure • 50 MHz - 1...
Description
MADP-011029-14150T
High Power PIN Diode 50 MHz - 12 GHz
Features
3 Terminal LPF Broadband Shunt Structure 50 MHz - 12 GHz Broadband Frequency >100 W Peak Power Handling < 0.1 dB Shunt Insertion Loss > 25 dB Shunt Isolation < 20°C/W Thermal Resistance Lead-Free 1.5 x 1.2 mm 6-lead DFN Package RoHS* Compliant and 260oC Reflow
Description
The MADP-011029 is a lead-free 1.5 x 1.2 mm DFN surface mount plastic packaged that provides both low and high signal frequency operation from 50 MHz to 12 GHz. The higher breakdown voltage and lower thermal resistance of the PIN diode provides peak power handling in excess of 100 W.
This device is ideally suitable for usage in higher incident power switches, phase shifters, attenuators, and limiter microwave circuits over a broad frequency where higher performance surface mount diode assemblies are required.
Ordering Information1,2
Part Number
Package
MADP-011029-14150T
3000 piece reel
MADP-011029-000SMB
Sample board
1. Reference Application Note M513 for reel size information. 2. All RF Sample boards include 5 loose parts.
Functional Schematic
Rev. V1
Pin Configuration3
Pin No. 1 2 3 4 5 6
7
Pin Name RFIN GND GND GND GND RFOUT
Paddle4
Description RF Input Ground Ground Ground Ground RF Output
Ground
3. M/A-COM Technology Solutions recommends connecting unused package pins to ground.
4. The exposed pad centered on the package bottom must be connected to RF, DC, and thermal ground.
* Restrictions on Hazardous Sub...
Similar Datasheet