Motion SPM 3 Module
FSBB30CH60D Motion SPM® 3 Series
August 2014
FSBB30CH60D
Motion SPM® 3 Series
Features
• UL Certified No. E209204 (UL1...
Description
FSBB30CH60D Motion SPM® 3 Series
August 2014
FSBB30CH60D
Motion SPM® 3 Series
Features
UL Certified No. E209204 (UL1557)
600 V - 30 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection
Low-Loss, Short-Circuit Rated IGBTs
Very Low Thermal Resistance Using Al2O3 DBC Substrate
Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
Single-Grounded Power Supply
LVIC Temperature-Sensing Built-In for Temperature Monitoring
Isolation Rating: 2500 Vrms / 1 min.
General Description
FSBB30CH60D is an advanced Motion SPM® 3 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
Applications
Motion Control - Home Appliance / Industrial Motor
Related Resources
AN-9085 - Motion SPM® 3 Ver.5 Series Users Guide
...
Similar Datasheet