DUAL DIGITAL FIBER SENSOR
96?M?0?746
DUAL DIGITAL FIBER SENSOR
FS-V21/21G/21R(P)/21X
Instruction Manual
3. Mounting Unit
G DIN Track Mounting
1...
Description
96?M?0?746
DUAL DIGITAL FIBER SENSOR
FS-V21/21G/21R(P)/21X
Instruction Manual
3. Mounting Unit
G DIN Track Mounting
1) As shown in the illustration, engage the claw on the lower side of the unit and the DIN rail, press the unit in the direction shown by arrow ➀, and move down the unit in the direction shown by arrow ➁.
2) When dismounting the unit, press the unit in the direction shown by arrow ➀ and move up the unit in the direction shown by arrow ➂.
G Using Mounting Bracket (accessory) Attach the unit to the mounting bracket, mount them together, and secure them with two M3 screws as shown in the illustration.
1. Safety Precautions
WARNING
This product is used to detect targets. Do not apply the product to safety circuits for human protection.
This product is not of explosion-proof construction. Do not use the products in places with flammable gas, liquid, or dust.
This product is a sensor of DC power supply type. Do not apply AC power. The product may explode or burn if 100 VAC or a higher voltage is applied.
Check that all the accessories are ready before use.
Accessories
Instruction manual (x 1)
Mounting bracket (x 1)
2. Part Names
Fiber lock lever
Operation indicator*
Digital monitor Preset value (PV) green indicator Current value (CV) red indicator
Dust cover
Set button
Manual button
Mode button
Expansion protective cover
Expansion connector Output selector
Cable
* The operation indicator of the FS-V21X (infrared model) will not be lit.
4. Con...
Similar Datasheet