TS78M05A
3-Terminal 500mA Positive Voltage Regulator
TO-252 (DPAK)
Pin Definition: 1. Input 2. Ground (tab) 3. Output
...
TS78M05A
3-Terminal 500mA Positive Voltage
Regulator
TO-252 (DPAK)
Pin Definition: 1. Input 2. Ground (tab) 3. Output
General Description
The TS78M05A Series positive voltage
regulators are identical to the popular TS7805 Series devices, except that they are specified for only half the output current. Like the TS7805 devices, the TS78M05A Series 3-Terminal
regulators are intended for local, on-card voltage regulation. Internal current limiting, thermal shutdown circuitry and safe-area compensation for the internal pass
transistor combine to make these devices remarkably rugged under most operating conditions. Maximum output current with adequate heatsink is 500mA
Features
● Output Voltage 5V ● Output current up to 500mA ● Internal thermal overload protection ● Internal short-circuit current limiting ● Output
transistor safe-area compensation ● Output voltage offered in 2% tolerance
Standard Application Circuit
Ordering Information
Part No.
Package
Packing
TS78M05ACP RO
TO-252 2.5Kpcs / 13” Reel
TS78M05ACP ROG TO-252 2.5Kpcs / 13” Reel
Note: “G” denotes Halogen Free Product.
A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate
voltage.
* = Cin is required if
regulator is located an appreciable
distance from power supply filter. ** = Co is not needed for stability; however, ...