SFW6R-2STE1

SC-SFW 01 F 1/4 SPECIFICATION FOR CONNECTOR USED FOR FPC/FFC WITH 1mm CONTACT SPACING COPING WITH AUTOMATIC MOUNTING & SMT SFW_ _R-1/2STE_ 1. SCOPE This specification covers the requirements for the connector (SFW_ _R-1/2STE_ ) with 1mm spacing to which the edge of FPC(Flexible Printed Circuit) and FFC(Flexible Flat Cable) can be connected by Zero-Insertion-Force method and which copes with automatic mounting and SMT. 2. APPICABLE STANDARDS JIS C 5402 Method for Test of Connectors for Electronic Equipment JIS C 0806 Packaging of Electronic Components on Continuous Tapes (Surface Mount Components) UL – 94 TESTS FOR FLAMMABILITY OF PLASTIC MATERIALS FOR PARTS IN DEVICES AND APPLIANCES. 3. CATALOG No. STRUCTURE Series Number of Contacts Right Angle For FPC/FFC, Contact direction 1   Lower contact type 2   Upper contact type Cope with automatic mounting & SMT Plastic Tape Packaging SFW 20 R – 1 ST E1 4. CONNECTOR SHAPE, DIMENSIONS AND MATERIALS See attached drawings. 5. ACCOMMODATED CONDUCTORS (FPC/FFC) See attached drawings. 6. PACKAGING CONDITION See attached drawings. 7. RECOMMENDED MOUNTING PATTERN DIMENSIONS See attached drawings. 8. RATING 8-1. Voltage   A.C.100V D.C.100V 8-2. Current   A.C.1A D.C.1A (Refer to the following note.) 8-3. Operating Temperature   -55°C ~ +85°C (Including terminal temperature rises) NOTE Allowable maximum current for one contact is 1A. Total allowable current for a whole connector is the value which is shown in the followi...