Connector
SC-SFW 01 F 1/4
SPECIFICATION FOR CONNECTOR USED FOR FPC/FFC WITH 1mm CONTACT SPACING
COPING WITH AUTOMATIC MOUNTING & S...
Description
SC-SFW 01 F 1/4
SPECIFICATION FOR CONNECTOR USED FOR FPC/FFC WITH 1mm CONTACT SPACING
COPING WITH AUTOMATIC MOUNTING & SMT SFW_ _R-1/2STE_
1. SCOPE This specification covers the requirements for the connector (SFW_ _R-1/2STE_ ) with 1mm spacing to which the edge of FPC(Flexible Printed Circuit) and FFC(Flexible Flat Cable) can be connected by Zero-Insertion-Force method and which copes with automatic mounting and SMT.
2. APPICABLE STANDARDS
JIS C 5402 Method for Test of Connectors for Electronic Equipment
JIS C 0806 Packaging of Electronic Components on Continuous Tapes
(Surface Mount Components)
UL – 94
TESTS FOR FLAMMABILITY OF PLASTIC MATERIALS FOR PARTS IN
DEVICES AND APPLIANCES.
3. CATALOG No. STRUCTURE
Series Number of Contacts Right Angle For FPC/FFC, Contact direction
1 Lower contact type 2 Upper contact type Cope with automatic mounting & SMT Plastic Tape Packaging
SFW 20 R – 1 ST E1
4. CONNECTOR SHAPE, DIMENSIONS AND MATERIALS See attached drawings.
5. ACCOMMODATED CONDUCTORS (FPC/FFC) See attached drawings.
6. PACKAGING CONDITION See attached drawings.
7. RECOMMENDED MOUNTING PATTERN DIMENSIONS See attached drawings.
8. RATING
8-1. Voltage A.C.100V
D.C.100V
8-2. Current A.C.1A
D.C.1A (Refer to the following note.)
8-3. Operating Temperature -55°C ~ +85°C (Including terminal temperature rises)
NOTE
Allowable maximum current for one contact is 1A. Total allowable current for a whole connector
is the value which is shown in the followi...
Similar Datasheet