6GHz RMS Power Detector
LT5581
6GHz RMS Power Detector with 40dB Dynamic Range
FEATURES
n Frequency Range: 10MHz to 6GHz n Accurate Power Measu...
Description
LT5581
6GHz RMS Power Detector with 40dB Dynamic Range
FEATURES
n Frequency Range: 10MHz to 6GHz n Accurate Power Measurement of High Crest Factor
(Up to 12dB) Waveforms n 40dB Log Linear Dynamic Range n Exceptional Accuracy Over Temperature n Fast Response Time: 1μs Rise, 8μs Fall n Low Power: 1.4mA at 3.3V n Log-Linear DC Output vs Input RF Power in dBm n Small 3mm × 2mm 8-Pin DFN Package n Single-Ended RF Input
APPLICATIONS
n GSM/EDGE, CMDA, CDMA2000, W-CDMA, LTE, WiMAX RF Power Control
n Pico-Cells, Femto-Cells RF Power Control n Wireless Repeaters n CATV/DVB Transmitters n MIMO Wireless Access Points n Portable RMS Power Measurement Instrumentation
DESCRIPTION
The LT®5581 is a 10MHz to 6GHz, low power monolithic precision RMS power detector. The RMS detector uses a proprietary technique to accurately measure the RF power from –34dBm to +6dBm (at 2.14GHz) of modulated signals with a crest factor as high as 12dB. It outputs a DC voltage in linear scale proportional to an RF input signal power in dBm. The LT5581 is suitable for precision power measurement and control for a wide variety of RF standards, including GSM/EDGE, CDMA, CDMA2000, W-CDMA, TD-SCDMA, UMTS, LTE and WiMAX, etc. The final DC output is connected in series with an on-chip 300Ω resistor, which enables further filtering of the output modulation ripple with just a single off-chip capacitor.
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All ot...
Similar Datasheet