3.2 mm x 5.0 mm Ceramic Package SMD Oscillator
Product Features: Wide Temperature Range (-55º to +125ºC) Frequency Stability option ±50 ppm over the full operating temperature range. Low Phase Noise RoHS Compliant
Frequency
1.000 MHz to 125.000 MHz
Output Level CMOS
Duty Cycle
Rise / Fall Time
Output Load Frequency Stability
Logic ‘0’ = 10% of Vcc max Logic ‘1’ = 90% of Vcc min Specify 50% ±10% or ±5% See Table in Part Number Guide
5 nS Max. for 10% to 90% of waveform 15 pF
See Frequency Stability Table (Includes room temperature tolerance and stability over operating temperature)
Aging (Initial First Year) Start-up Time
Supply Voltage
Current
Operating
Storage
Phase Jitter: (12kHz – 20MHz) Tri-State (Pin 1) Function Enable / Disable Time Current, Standby Mode
±3 ppm max 5 mS Max. See Input Voltage Table, tolerance ±5 % 50 mA Max.
-55 C to +125 C -55 C to +125 C
1 pS RMS max
Standby 100 nS Max. N.C. or ≥ 70% Vcc = Enable. ≤ 30% Vcc = Disable 20 µA
ISM82 Series
5.00±.20
IYWW FREQ
3.20±.20
1.30 max
2.54 43 12
1.20 2.54
1.20
1.20 2.20
1.40
Recommended Land Pattern
Pin Connection
Pin 1
Enable / Disable or NC
Pin 2
Ground
Pin 3
Output
Pin 4
Vcc
Part Number Guide
Package
Input Voltage
1 = 1 .8 V
2 = 2.7 V
ISM82
3 = 3.3 V 6 = 2.5 V
7 = 3.0 V
Operating Temperature
7 = -55ºc to +125ºc
Sample Part Number:
Symmetry (Duty Cycle)
Output
5 = 45 / 55 max
3 = 15pF
6 = 40 / 60 max
6 = 30pF *
ISM82-3756BH-20.000
Stability (in ppm)
Enable / Disable
Frequency
B = ±50 ppm
H = Enable
C= ±100 ppm
O = N/C
20.000
*Oscillator may not meet 5% symmetry over temperature range with 30 pF load. NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise.
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email:
[email protected] ● www.ilsiamerica.com
Specifications subject to change without notice
Rev: 10/20/14_A3 Page 1 of 2
3.2 mm x 5.0 mm Ceramic Package SMD Oscillator
Pb Free Solder Reflow Profile:
Typical Application:
ISM82 Series
*Units are backward compatible with 240º C reflow processes
Package Information:
MSL = N.A. (Package does not contain plastic; storage life is unlimited under normal room conditions.) Termination = e4 (Au over Ni over W base metallization).
Tape and Reel Information:
Quantity per Reel A B
C
D E F
1000
16 +/-.3 8 +/-.2 7.5 +/-.2 17.5 +/-1 50 / 60 / 80 180 / 250
Environmental Specifications:
Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance
MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215
Marking:
Line 1: ILSI and Date Code (YWW) Line 2: Frequency
Proprietary and Confidential This document contains proprietary information, and such information may not be disclosed to others for any purpose nor used for
manufacturing purpose without the written permission o ILSI America.
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email:
[email protected] ● www.ilsiamerica.com
Specifications subject to change without notice
Rev: 10/20/14_A3 Page 2 of 2
.